當前位置: 主頁 > 關於公司 > 公司新聞 >

石材雕刻機與廣告雕刻機區別在哪裏

瀏覽量:100 次   來源:AG娛樂網址雕刻機

     
    從外觀上來說,雕刻機的整體構造基本上都是大同小異的,無非就是三個方向軸外加一個主軸。像廣告雕刻機無非就是做一些亞克力、芙蓉板、PVC等非金屬切割,主軸一般選擇2.2的就很可以了,其他的配置比如導軌用什麽的,驅動塊用什麽的,變頻器用什麽牌子的,可以根據自己的資金狀況來選擇一下。
     
    From the appearance, the overall structure of the engraving machine is basically the same, nothing more than three directions of axis plus a main axis. Advertising engraving machine is nothing more than doing some non-metal cutting of acrylic, hibiscus board, PVC, etc. Generally, it is enough to select 2.2 for the main shaft. Other configurations such as what are used for guide rails, what are used for drive blocks, and what brands are used for inverter , You can choose according to your financial situation.

    石材雕刻機
    廣告雕刻機因為雕刻的材料硬度很小,所以對機器的要求不是很高。但是石材雕刻機就不一樣了,一般客戶雕刻的材料硬度都在7級以上,像花崗岩、麻石等石材的硬度都在10級以上,雕刻硬度如此高的材料對機器的要求就不能太低了,最起碼主軸要選擇3千瓦以上的,步進電機和驅動器要用力度和精度好一些的,導軌最好選擇台灣進口方形導軌,這樣機器的整體穩定性才能達到要求。有些客戶貪圖便宜,買一些低價格的低配置的機器,時間長了就能感覺出來機器雕刻會很費力,而且對石材雕刻刀具損壞比較嚴重,這樣一來不但影響加工成本,而且加工時間也會達不到要求!

     
    Advertising engraving machine is not very demanding because of the low hardness of the engraving material. But stone engraving machines are different. Generally, the hardness of the materials carved by customers is above grade 7, and the hardness of stone materials such as granite and hemp is above grade 10. The material requirements for such high carving hardness cannot be too low. At least, the spindle should be more than 3 kilowatts, the stepper motor and driver should use better strength and accuracy, and the guide rail should preferably choose the square guide rail imported from Taiwan, so that the overall stability of the machine can meet the requirements. Some customers are eager to get cheap, buy some low-priced, low-configuration machines. It can feel that the machine engraving will be laborious over time, and the stone carving tools will be seriously damaged. This will not only affect the processing cost but also the processing time Can't meet the requirements!

    From the appearance, the overall structure of the engraving machine is basically the same, nothing more than three directions of axis plus a main axis. Advertising engraving machine is nothing more than doing some non-metal cutting of acrylic, hibiscus board, PVC, etc. Generally, it is enough to select 2.2 for the main shaft. Other configurations such as what are used for guide rails, what are used for drive blocks, and what brands are used for inverter , You can choose according to your financial situation.

聯係AG娛樂網址

地址:山東省濟南市天橋區桑梓店鎮繞城高速北200米海風產業園4-5號
聯係人:師楠
電話號碼:0531—69989273
18866899200

聯係AG娛樂網址

版權所有:濟南AG娛樂網址數控設備有限公司 魯ICP備15034528號
地址:山東省濟南市天橋區桑梓店鎮繞城高速北200米海風產業園4-5號
聯係人:師楠 聯係方式:0531—69989273 18866899200 網站地圖

AG8非同凡响 环亚游戏平台 777游戏 AG线上技巧 AG真人游戏网站app下载